Top 10 Best 1 Hp Sump Pump Made In Usa: Editor Recommended

The 10 Best 1 Hp Sump Pump Made In Usa Reviews:

1. Sump Pump, PROSTORMER 3500 GPH 1HP Submersible

Sump Pump, PROSTORMER 3500 GPH 1HP Submersible

Prostormer 1HP Water Pump is featured by a durable thermoplastic housing,max delivery rate 3500GPH, this submersible pump is ideal for draining water from flooded basements, water wells, garages, garden pond. It uses the function of build-in float switch. It makes the pump work more stable and protects float switch from external factors. PROSTORMER SUMP PUMP uses a mechanical seal technology to seal more stablely, leak less, last longer and consume less frictional power.

Highlighted Features:

  • ?【Kindly Tip 1】When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape.
  • ?【Kindly Tip 2】The device is not suitable for continuous operation (e.g.as recirculation pump for ponds).This type of use will substantially shorten the pump’s life expectancy.
  • ?【1HP High Power】Prostormer Sump Pump uses 1HP power, which is more efficient than ordinary 3/4HP sump pump; Max 3500GPH rating tackles any draining job at a fraction of the time.
  • ?【Multi Outlet Sizes】3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be.
  • ?【Manual Mode】Set the switch to the MANUAL positon the pump will now not automatically switch off but carry out pumping, even if theremaining water level is reached and the pump runs dry. You should cut off the power immediately to prevent the coil from getting burned.
  • ?【Automated Mode】Set the switch to the AUTO position. Once you have plugged the device into the socket, the pump will switch on automatically when the water exceeds the start-level and switch off when the stop-level hasbeen obtained.this means that the pump can be left on at all times and will keep the waterin a cellar or boat, for example, at the required level.bear in mind that this pump is notdesigned to be used continuously, it must be switched off at regular intervals.
  • ?【Sealing Structure & Durable Construction】The sump pump features a durable sealing structure and the durable thermoplastic body keeps the pump from corrosion. The higher base plate which assures the prevention of debris collection in the sump pit.

Buy on Amazon

2. Superior Pump 91250 1/4 HP Thermoplastic

Superior Pump 91250 1/4 HP Thermoplastic

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty. Will pump up tp 25 ft. of vertical height.

Highlighted Features:

  • 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25′ of vertical height
  • Tough thermoplastic construction; 10′ cord length
  • 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
  • Removable suction screen and handles up to 1/8 inch solids
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

Buy on Amazon

3. Wayne WWB Submersible Transfer Pump

Wayne WWB Submersible Transfer Pump

WAYNE WWB WaterBUG 1/6 HP 1350 GPH Submersible Pump with Multi-Flo Technology, Removal Tool, Yellow

Highlighted Features:

  • DON’T LET STANDING WATER BUG YOU – The WAYNE WaterBUG is your new ultimate multi-purpose water removal tool. The WWB model is easy to use in tight spaces like window wells, or big spaces like basements thanks to patented Multi-Flo Technology.
  • GET RID OF WATER QUICKLY – Multi-Flo technology allows for easy selection of the best water removal option. This WWB water pump will get your basement or yard virtually dry by pumping up to 1350 GPH and removing water down to 1/16”.
  • REMOVAL OPTIONS – Top discharge is perfect for removing water from small or tight spaces: window wells, buckets, etc. Side discharge is ideal for easy water removal from flat open surfaces: flat roofs, flooded basements, standing water in yard, etc.
  • ADDITIONAL FEATURES – Corrosion-resistant brass discharge outlets, with tethered cap seals, fit any standard garden hose. Multi-ring suction strainer filters debris, keeping it clear from the suction intake to minimize clogging.
  • QUALITY YOU DESERVE – Proudly assembled in the USA for quality you can trust. Please note: the pump should be unplugged once the water is gone or pump will run dry.

Buy on Amazon

4. PumpSpy Primary Sump Pump Backup Power System

PumpSpy Primary Sump Pump Backup Power System

PumpSpy’s Primary Sump Pump Battery Backup Power System is an ideal solution for homeowners worried about keeping their basements dry during a power outage. Engineered to reliably handle either one Primary Sump Pump (12.5 Amps MAX) or two Primary Sumps simultaneously (with a combined Amp draw not exceeding 12.5) with a pure sine wave output that is designed to simulate the characteristics of typical utility company generated 120 VAC home power. This system automatically switches from 120 VAC to 12 VDC when AC power goes out and automatically reverts back when AC power is restored. Charges and maintains the battery (Not Included) with a powerful 10 Amp built-in charger to quickly recover from any extensive outage.

Highlighted Features:

  • Automatically switches over to battery power when AC power goes out. (The PumpSpy 75 Ah Deep Cycle AGM Battery is Recommended)
  • Generates a Pure Sine Wave 120 VAC voltage to reliably power your primary sump pump
  • Automatically recharges a battery When AC Power is restored with a powerful 10 Amp built-in charger
  • 1500 Watt output is enough to power two primary sump pumps simultaneously (with a combined Amp draw not exceeding 12.5)
  • Can be used as a power inverter for many applications requiring backup power

Buy on Amazon

5. WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump

WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump

1/3 hp cast iron submersible sump pump with vertical switch pumps up to 4600 gph at 0′ designed for 11 inch diameter or larger sump basin top suction design filters debris and minimizes clogging designed for easy installation without any Plumbing changes epoxy coated steel high performance 1/3 hp motor 1-1/2 inch NPT discharge & durable cast iron base easy carry handle for portability float guard protects switch from hang ups Easy installation and easy handling.

The Wayne CDU790 features durable cast iron housing for long life and quiet operation. This submersible pump is compactly designed for 11″ or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1 1/2″ discharge allows easy installation plus maximum flow. Similar applications to the following brands of submersible sump pumps , Craftsman, Zoeller, Flotec, Water Ace, Myers, Little Giant, Liberty, Pit Viper, Ridgid, Blue Angel, Sta-Rite, Starite, Diamond, Star, Flint and Walling, Coleman, Maytag, Jacuzzi, ShurDri, Shur-dri, GSW, Teel, Master Plumber, UL listed. Intended for indoor use only.

Highlighted Features:

  • Assembled in the US with foreign and domestic parts.
  • Cast iron pump housing for durability
  • Mechanical float switch provides reliable operation and allows installation in sump basins 11″ in diameter or larger
  • Top suction strainer filters debris and protects pump from clogging
  • High capacity 1-1/2″ npt discharge
  • High performance; max. flow rate is 4600 Gallons Per Hour; 3060 GPH at 10 ft. of discharge lift
  • 8 ft Water Resisitant Power Cord provides easy access to nearby GFCI protected outlet

Buy on Amazon

6. Rainbro 1/2 HP Thermoplastic Submersible Sump Pump

Rainbro 1/2 HP Thermoplastic Submersible Sump Pump

The RainBro PSU050V 1/2 horsepower thermoplastic submersible sump pump features a maximum pumping capacity of 2980 GPH to lift water to 28 ft. height. It comes with the vertical float switch for automatic operation. It can be used as a typical sump pump and install in a sump or wet location where drainage collects, and also as a portable utility pump to move water from place to place frequently.

The RainBro PSU050V 1/2 horsepower thermoplastic submersible sump pump features a maximum pumping capacity of 2980 GPH to lift water to 28 ft. height. It comes with the vertical float switch for automatic operation. The minimum diameter of the sump pit is 12 in. The minimum depth of the pit is 14 in. Normal discharge for this pump is 1-1/2 in. However, if existing 3/4 in. discharge pipe is already in place, wrap the threads of the 3/4 in. adapter included with thread tape and thread into pump discharge.

Highlighted Features:

  • USER FRIENDLY – 1/2 hp, 10ft. power cord, max. Flow rate is 2980 US GPH, 1-1/2’’ discharge with 1 1/4’’ adapter and 3/4’’ fitting included.
  • TOP SUCTION STRAINER –Excess dirt and debris won’t clog the pump with the built-in top suction strainer filter.
  • AUTOMATIC OPERATION –The vertical float switch can control pump start/stop automatically. The pump will automatically disconnect the power and stop working when the water level is below 2 inch, when the water level rises above 7.8 inch the pump will start working automatically.
  • DURABLE – Corrosion-resistant thermoplastic volute and sturdy aluminum motor house with build-in automatic thermal overload protector.
  • WORRY FREE – 1 year manufacturer’s warranty.

Buy on Amazon

7. Sump Pump, PROSTORMER 1HP 3700GPH Submersible Clean/Dirty Water

Sump Pump, PROSTORMER 1HP 3700GPH Submersible Clean/Dirty Water

Prostormer Submersible Water Sump Pump uses 1HP power, which is more efficient than ordinary 3/4HP sump pump; Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the time. This submersible pump is ideal for draining water from flooded basements, water wells, garages, garden pond. It is also great for pool changing water work with its 16.5-feet heavy-duty power cord.

Highlighted Features:

  • ⚡⚡【Kindly Tip】When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape.⚡⚡
  • ?【1HP High Power】Prostormer Sump Pump uses 1HP power, which is more efficient than ordinary 3/4HP sump pump; Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the time.
  • ?【Multi Outlet Sizes】3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be.
  • ?【Keep Open Mode】When you put the float switch locked on the sump pump, the sump pump will keep working all the time. Once the pump can not pump any water, you should cut off the power immediately to prevent the coil from getting burned.
  • ?【Automatic ON/OFF Mode】The float switch should be unlocked from the pump. When the water level rises above the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.
  • ?【Sealing Structure & Durable Construction】The sump pump features a durable sealing structure and the durable thermoplastic body keeps the pump from corrosion. The higher base plate which assures the prevention of debris collection in the sump pit.

Buy on Amazon

8. Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic

Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic

98-0001 Features: -Automatic effluent submersible sump pump. -Powder coated cast iron construction dissipates motor heat and prevents rust for longer life. -Non clogging vortex impeller allows pump to pass small diameter solids. -100% Factory tested under water to ensure quality and reliability. -US made by quality craftsman. Specifications: -Voltage: 115V. -Horse power: 1/2HP. -Dimensions: 12″ H x 10. 13″ W.

Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.

Highlighted Features:

  • 1/2 HP pump for residential sump pits or septic tanks
  • Automatic model with integral float switch, 1½” discharge, passes 1/2″ solids
  • Performance: 72 GPM at 5′ head, shut-off: 23′ TDH
  • All cast iron construction with stainless steel guard and handle
  • 100% factory tested

Buy on Amazon

9. Sump Pump, 1HP 3500GPH Electric Water Removal Pump with Build-in Float Switch

Sump Pump, 1HP 3500GPH Electric Water Removal Pump with Build-in Float Switch

1 * Water Pump

1 * User Manual

Parameter

Power consumption : 1HP(4.1A)

Power supply : 120v ~ 60Hz

Max. Flow rate : 3500GPH

Max. Pump height : 26Ft

Max. Submersion depth : 23Ft

Protection type : IPX8

Weight approx : 11.0 lbs

Max.particle size : 1/2 inch

Highlighted Features:

  • POWERFUL AND ECONOMIC PUMP:Sump Pump uses 1HP power. This pump easily passes solids up to 1″ in diameter. GREAT for swimming pools, cellars or garden pond.
  • HIGHER DURABILITY:SUMP PUMP uses a mechanical seal technology to seal more stablely, leak less, last longer and consume less frictional power.
  • AUTO:When you press AUTO, the pump will enter automatic mode.Once you have plugged the device into the socket, the pump will switch on automatically when the water exceeds the start-level and switch off when the stop-level hasbeen obtained.
  • MULTI OUTLET SIZE:Compatible with1 inch ,1-1/4 inch, 1-1/2 inch. Three fittings with different diameters for outflow
  • PERFECT AFTER-SALES:If you encounter a problem during the use, please contact us in time, we will reply and solve your problem in the fastest way.
  • 【1.Attention:When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape.】
  • 【2.Attention:The device is not suitable for continuous operation (e.g.as recirculation pump for ponds).This type of use will substantially shorten the pump’s life expectancy.】
  • 【3.There is no water tube in the package. You need to buy the appropriate size water pipe by yourself】

Buy on Amazon

10. LG-SC75SA 3/4 hp Cast Iron Sump Pump with Snap

LG-SC75SA 3/4 hp Cast Iron Sump Pump with Snap

Little Giant Select Series pumps are made from from durable materials and provide great performance with many horsepowers and switch styles.The product is manufactured in United states.These products on exceptionally high order fulfillment rates, breadth of available products.Select propellants that deliver consistent accuracy and performance

Highlighted Features:

  • BUILT TO LAST: This automatic heavy duty cast iron pump is ideal for use in residential sump systems
  • AUTOMATIC OPERATION: Contractor-preferred snap-action piggy-back switch; actives from 3 to 5 inches, activates when water reaches 7 to 10-inches, shuts off when water drops down to 3 to 5 inches
  • CLOG-RESISTANT DESIGN: capable of passing 1/2-inch diameter semi-solids
  • POWERFUL 3/4 HP MOTOR: for better flood protection
  • Warranty: This product is backed by the Little Giant Select Series 3-year manufacturer’s warranty and supported by our outstanding Technical Support experts

Buy on Amazon