Top 10 Best Screwdrivers Made In Usa: Editor Recommended

No products found.

The 10 Best Screwdrivers Made In Usa Reviews:

1. Klein Tools 32500 11-in-1 Screwdriver / Nut Driver Set, 8 Bits (Phillips, Slotted, Torx

Klein Tools 32500 11-in-1 Screwdriver / Nut Driver Set, 8 Bits (Phillips, Slotted, Torx

This versatile 11-in-1 tool has everything the professional needs. The integrated screwdriver/nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. The blades are interchangeable for quick and easy switch out. The Cushion-Grip handle allows for greater torque and comfort. You’ll be reaching for this tool to meet your needs on the job.. Integrated screwdriver and nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. Contains: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess. Interchangeable blade for quick and easy switch out. Industrial strength, heat treated bits. Blast finish bit tips provide a firm hold and reduce cam-out. . The following replacement bits are available: see Cat. No. 32482 (#1 Philips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX). TORX is a registered trademark of Acument Intellectual Properties, LLC. Assembled in USA of US and imported components.

Highlighted Features:

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess
  • Interchangeable blade for fast and easy switch out; comfortable Cushion-Grip handle
  • Blast finish bit tips provide a firm hold and reduce cam-out
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)
  • TORX is a registered trademark of Acument Intellectual Properties, LLC
  • Assembled in USA of US and imported components

Buy on Amazon

2. TEKTON Hard-Handle Black Oxide Blade Screwdriver Set, 8

No products found.

The classic design of the TEKTON hard handle screwdrivers provides a comfortable, natural grip with easy-to-read size markings. Glass-reinforced nylon handles deliver extreme durability and chemical resistance. Precisely milled tips maintain tight tolerance over time.

Highlighted Features:

  • Includes 8-pc standard 4 inch screwdrivers: #0, #1, #2, #3 Phillips; 1/8, 3/16, 1/4, 5/16 in. slotted
  • Extremely durable handle made of glass-reinforced nylon resists damage from extreme temperatures, high impacts, fuels, grease, cleaners, and solvents
  • An insert molding process forms the handle around the blade, rather than forcing the blade into a premade handle, resulting in a straighter blade that won’t twist out
  • Screwdriver tip geometry is precision milled for an exact fit with fasteners, and made of strong, heat-treated steel to ensure the tip holds its shape over time
  • Easy-to-read markings show the tip type and size on the end of the driver for easy identification
  • Protective black oxide finish can’t flake off like plated finishes
  • All drivers are available individually or as part of other sets
  • Made in USA

No products found.

3. TEKTON High-Torque Black Oxide Blade Screwdriver Set, 12

TEKTON High-Torque Black Oxide Blade Screwdriver Set, 12

With unique three-sided handles, the TEKTON 12-pc. Screwdriver Set gives you the leverage to generate more torque. Both the full- and stubby-length handles offer real mechanical advantage, not the friction against your skin, to break loose stubborn fasteners. Full-length handles also have rounded top and bottom sections that let your fingertips spin long fasteners quickly. Making the most of awkward hand positions when you have limited room, the compact stubby-length handles give you extra control to turn and tighten fasteners. All the blades are made of premium chrome molybdenum steel and are strengthened through an exacting heat treating process. Rather than a layer of plating, the steel surface of the blades is directly treated with a hot black oxide finish—the same process used to protect firearms. This finish can’t flake off, and it preserves the precisely sized tips for an exact fit in fasteners over time. The butt ends have a clear size marking that is easy to identify in your tool belt or chest drawer.

Highlighted Features:

  • Includes (6) slotted screwdrivers: 1/4 x 1-1/2 in., 1/8 x 4 in., 3/16 x 4 in., 1/4 x 4 in., 3/16 x 8 in., 1/4 x 8 in., (6) Phillips screwdrivers: #2 x 1-1/2 in., #0 x 4 in., #1 x 4 in., #2 x 4 in., #1 x 8 in., #2 x 8 in.
  • Unique three-sided handles combine maximum power with smooth speed
  • Premium alloy steel blades have precisely sized tips for an exact fit in fasteners
  • Size marking on butt ends is easy to identify in tool belt or drawer
  • Handle profile resists rolling on inclines up to 20 degrees
  • Made in USA

Buy on Amazon

4. Craftsman 9-31796 Phillips Slotted Torx Mixed Screwdriver Set, 23 Piece

No products found.

You need the right tool for the job, and when it comes to screwdrivers, this Craftsman Clear Handle 23 pc. Screwdriver Set puts the right tool at your fingertips. Whether the job calls for a slotted, Phillips or Torx screwdriver, this set gives you a range of options unmatched by other brands. Ideal for professional mechanics and DIY-ers alike, you’ll always have the right tool on hand. Each tool in the Craftsman 23 pc. Screwdriver Set has alloy steel blades that are heat-treated for maximum strength and durability, as well as a satin nickel finish. The clear butyrate handles are color-coded, so you can quickly glance over and grab either a full clear Phillips or red-striped slotted screwdriver. There’s no need to waste time digging through a box of tools when you want to be focused on getting the job done.

Highlighted Features:

  • 23-Pc Screwdriver Set, Lifetime Warranty, Made In USA
  • 9 Slotted Sizes: 3/32×1-1/2, 1/8×2, 1/8×4, 3/16×1-1/2, 3/16×4, 3/16×6, 3/16×9, 1/4×4, 1/4×6
  • 7 Phillips sizes: P0x1-1/2, P0x2-1/2, P1x1-1/2, P1x3, P2x4, P2x6, P2x8
  • Pocket 4-way and 6 Torx sizes: T10, T15, T20, T25, T27, T30
  • Heat Treated Alloy Steel Blades, High Strength Fluted Handles

No products found.

5. Performance Tool W975 6-in-1 Quick Change Screwdriver with Magnetized Tips and Hex Torque Handle

No products found.

Access hard to reach screws with ease using the TEKTON 20 in. by 1/4 in. Flat Extra Long Screwdriver. Easily tighten or loosen fasteners with the durability that comes from a heat-treated, chrome vanadium steel shaft with a corrosion-resistant, chrome plated finish. Magnetized, precision-machined tips prevent dropped fasteners, simplifying any project. Experience strength in comfort with the Hex Torque handle. Its design with non-slip handle grips allows for maximum turning power and minimum user fatigue.

Highlighted Features:

  • Access hard to reach screws with ease using the TEKTON 20 in
  • by 1/4 in
  • Flat Extra Long Screwdriver
  • 1/4″ and 3/16″ Slotted

No products found.

6. Grace USA – Gunsmith 24 Bit Mag Tip Screwdriver Set – GRMT24

Grace USA - Gunsmith 24 Bit Mag Tip Screwdriver Set - GRMT24

Grace USA gunsmith 24 bit mag tip screwdriver set is made specifically with the gunsmith in mind.In the long tradition of Grace USA quality and attention to detail each bit is precisely made so the bit portion that fills the slot of each gun screw is parallel the depth of the slot until the hollow ground takes effect giving the right radius for optimum strength.

Highlighted Features:

  • A TRADITION OF EXCELLENCE SINCE 1941: Since being founded in 1941, every tool that has been produced by Grace USA has undergone a rigorous inspection process which helps ensure genuine QUALITY and PRECISION in every tool that you can TRUST.
  • PRECISION FOR THE PERFECT FIT – EVERY TIME: This set includes 11 Grace USA Parallel Hollow Ground slotted bits, 3 Phillips bits, 8 Hex bits and 2 Torx bits all made of S-2 Tool Steel.
  • BLADES THAT ARE BUILT TO LAST: The square shanked blades are hardened to R/C 52-56 and constructed of USA 8650 Chromium-Vanadium steel alloy with a black oxide finish while backed by our Forever Guarantee not to twist or chip.
  • A HANDLE YOU’LL ENJOY HOLDING: Our screwdriver handles are turned to our exact specifications using Maine hardwood, delivering a strong, non-slippery grip – even when your hands are oily. The handles are topped off with a nickel-plated steel ferrule.
  • CRAFTED FOR MANY APPLICATIONS: While our screwdrivers were constructed as the ideal tool for gunsmithing, they also can be used for woodworking, industrial, military, mechanical and home care needs.
  • PROUDLY 100% USA SOURCED & MADE: All Grace USA tools are manufactured from the best American made materials to a high standard of excellence by craftsmen who care about the products they produce.
  • BACKED BY OUR LIFETIME GUARANTEE: Grace USA hand tools are Forever Guaranteed to be free of defects in material and workmanship. If any tool fails to give complete satisfaction it will be replaced free of charge.

Buy on Amazon

7. Channellock 61A 6N1 Screwdriver with Nut driver Acetate Handle

No products found.

American-Made drivers from CHANNELLOCK mean business. They are the strongest, most durable screwdriver. High torque acetate handle for superior durability and solvent resistance .Nickel chrome finish for exceptional corrosion resistance .Precision machined vapor blast tip for a precise fit .Custom heat-treated alloy steel blade .

Highlighted Features:

  • High torque acetate handle for superior durability and solvent resistance
  • Precision machined tips
  • Heat-treated alloy steel shaft
  • Zinc coated bits and black oxide coated shank for corrosion resistance
  • Made in the USA
  • Tube and bits pull out and reverse easily to configure the driver you need

No products found.

8. Bondhus 8pc Torx Star Screwdriver Set T25-T6

No products found.

Includes these Tip Sizes: T6, T7, T8, T9, T10, T15, T20 & T25 Bondhus USA 34532, Stardriver screwdriver sizes T6, T7, T8, T9, T10, T15, T20, and T25;Precision machined ends provide full engagement

Highlighted Features:

  • Protanium High Torque Steel
  • Vinyl reseal case
  • New in Vinyl Pouch

No products found.

9. Channellock SD-10A 10pc Professional Screwdriver Set

Channellock SD-10A 10pc Professional Screwdriver Set

Founded in 1886, Channellock is a worldwide leader in the manufacture of high-quality pliers and assorted hand tools. Now run by the fifth generation of the DeArment family, Channellock tools reflect a tradition of dedication to excellence maintained for well over a century. Over the years, Channellock has obtained several patents including one in 1965 for the conical surface created on the cam side of the pliers when undercut and another in 1984 for the PermaLock fastener found in its Tongue and Groove Pliers. Channellock still manufactures more than 120 different sizes and types of pliers and hand tools at its facilities in Meadville, Pennsylvania.

Highlighted Features:

  • High torque acetate handles for superior durability and solvent resistance
  • Custom heat-treated alloy steel blades
  • Nickel chrome finish for exceptional corrosion resistance
  • Precision machined vapor blast tips for a precise fit
  • Made in the USA

Buy on Amazon

10. TEKTON High-Torque Black Oxide Blade Screwdriver Set, 18-Piece

No products found.

Relying on three-sided geometry rather than the friction against your skin, the unique handles of the TEKTON High-Torque Screwdriver Set give you the leverage to generate more torque. Easy-to-read markings show the tip type and size on the end of the driver for easy identification. Precisely milled tips maintain tight tolerance over time.

Highlighted Features:

  • Includes (2) stubby screwdrivers: #2 Phillips; 1/4 in. slotted, (11) standard screwdrivers: #0, #1, #2 Phillips; 1/8, 3/16, 1/4, 5/16 in. slotted; T10, T15, T20, T25 Torx, and (5) long screwdrivers: #1, #2 Phillips; 3/16, 1/4, 5/16 in. slotted
  • Unique three-sided handles combine maximum power with smooth speed
  • An insert molding process forms the handle around the blade, rather than forcing the blade into a premade handle, resulting in a straighter blade that won’t twist out
  • Premium alloy steel blades have precisely sized tips for an exact fit in fasteners
  • Size marking on butt ends is easy to identify in tool belt or drawer
  • Handle profile resists rolling on inclines up to 20 degrees
  • Made in USA

No products found.