Top 10 Best Soft Sided Cooler Made in Usa : Editor Recommended

The 10 Best Soft Sided Cooler Made in Usa Reviews:

1. Recoil, 4-in-1 Auto-Adjusting Cooler ,Made in USA from Hemp Plastic .

Recoil | 4-in-1 Auto-Adjusting Cooler | Made in USA from Hemp Plastic

Highlighted Features:

  1. We are proud to be 100% USA Made and designed with 100% USA sourced components. 100% of Hemp grown and processed in the USA. Hemp used in the Recoil helps to keep your drinks cold and reduces plastic used by 25% and makes for unique product coloration.
  2. Recoil is the FIRST cooler to Auto-Adjust and secure your favorite canned and glass bottled beverages; fits 12oz cans, 12oz skinny cans, 16oz tall boy cans, and most 12oz glass bottles. No need to add parts, remove parts, swap parts, or reach for an alternate cooler.
  3. Lid and bottom resist damage from drops, even with a full drink inside. The Recoil’s novel quarter-turn lid design provides a durable connection without risk of cross threading.
  4. HOW IT WORKS – 1. Remove lid 2. Place can or bottle in Recoil 3. Firmly press down on lid while turning 4. Rotate mouth of can as desired
  5. Colder is NOT always better. We connected with our local brew master and found that IPA’s, Ales, Porters & Stouts (to name a few) reveal their intended flavor profiles at slightly elevated temperatures. The Recoil is designed to maintain an optimal drinking temperature range over the average drinking period .MADE IN THE USA .

No need to add parts, remove parts, or reach for another cooler! The Recoil is designed to Auto-Adjust and securely fit all your favorite canned and bottled beverages. Switch from slim can seltzers, to a delicious 16oz craft brew, to a typical 12oz can, and finally to the last bottle of beer in the fridge. There won’t be any hassle mixing it up – simply drop in the next beverage and put the lid back on.that’s it!

Not only is the Recoil assembled in the USA, but every single component of the Recoil is 100% produced by USA businesses. The Recoil was also designed in the USA, by a start-up company who wanted to make an innovative can & bottle cooler, all while ensuring the product stayed on USA soil.

The Recoil is partially made of Hemp Plastic. Hemp is blended into the plastic, which ultimately reduces the amount of plastic used by 25%! On top of using less plastic, hemp is awesome at pulling carbon dioxide from the air during its growth cycle. This one-two punch makes Hemp Plastic a carbon negative material.

From the Hemp Plastic components to the packaging, and everything in between, small-medium sized business are the stars of the show. We ourselves are a small business and are proud to present you our products! The Recoil is a product that you can have a few drinks from while knowing it supports much more than just your beverage.

Hemp used to produce our products is grown in the USA! Hemp is a fairly new crop in the USA and has many uses. Our focus is on using the fibrous portions to reinforce and reduce plastic used. Reducing the amount of plastic used and helping farmers enter a brand new supply chain, we think this is pretty neat. From farms to your tables, campsites, and backyards!

We look forward to the Recoil Cooler fitting all of your favorite beverages and providing some great conversation material with your family and friends!

Buy on Amazon

2. iM Sports Miler Running Arm Cooler & Compression Sleeves.

iM Sports Miler Running Arm Cooler & Compression Sleeves

Highlighted Features:

  1. Try a pair of our arm sleeves for running and see what American Made Quality is all about !
  2. Wick away comfort fabric blend keeps our running arm sleeves cool in the heat.
  3. Keeps our running sleeves firmly in place, even during long runs.
  4. Our running arm sun sleeves block 96% of Harmful UV Rays protecting your skin!
  5. Improve circulation and reduce the chance of injury through mild compression. MADE IN USA.

Block 98% of harmful UV rays (UPF 50+ sun protection) and our Stay-Dry fabric blend will keep you comfortable no matter what the temperature is. Premium running compression sleeves are top notch ultra-snug, second skin fit. Every stitch is sewn with Made in USA quality. Our sleeves will fit just about everyone from youth to adults of all sizes. They’re so comfortable you will forget you have them on.

For the Best Fit – Measure Your Arm
Measure around your upper arm (above bicep, near armpit). Select the sleeve size where your measurement is within the range.
XX-Small = 8.75” to 9.75” (length = 16”)
X-Small / Small = 9.75” to 11.75” (length = 17”)
Medium / Large = 11.5” to 13.5” (length = 18”)
X-Large / XX-Large = 13.5” to 15.75” (length = 20”)
XXX-Large = 16” to 19” (length = 21”)

Taking care of your iM Sports Running Arm Sleeves couldn’t be easier! Taking proper care of your sleeve will help maintain its appearance and its elasticity.
Machine or hand wash cold
Lay flat and air dry
Do not put in dryer. iM Sports Running Sun Sleeves for arms will air dry quickly because of the fabric blend we use.

Buy on Amazon

3. KENAI 65 Cooler, Red, 65 QT, Made in USA.

KENAI 65 Cooler, Red, 65 QT, Made in USA

Highlighted Features:

  1. If the walls of a cooler aren’t uniform in thickness, the strength and durability of that cooler is questionable at best. Our coolers are built with rotationally-molded LLDPE plastic to ensure even wall thickness, durability, and max performance on every adventure.
  2. We want to protect The Good Land for all of us to enjoy. KENAI Coolers use Ecomate for optimal cooling. We also use it because this unique insulation has no global warming potential, no ozone depletion potential, and is made with no volatile organic compounds.
  3. A cooler isn’t cool if it doesn’t keep things cold. KENAI Cooler lids seal for optimal insulation even in hot temperatures with a silicone rubber gasket to keep cold air trapped inside to extend the life of ice. Everything for your adventures stay colder, fresher, longer.
  4. When you’ve got an armful of stuff for the cooler and no one’s around to open the lid for you – what do you do? Give a quick, one-handed flip of the latch and you’re in. So is your stuff. Secure the latch and the lid won’t open. Genius.
  5. MADE IN THE USA.

The KENAI 65. For adventures where the end is beyond the next horizon and one more horizon after that. Bring the 65 along packed with enough ice, food, and beverages to get you from where you start, to where you discover what The Good Land serves up and home again. 65 quarts of peak performance to keep ice frozen and foods fresh.

This rotomolded cooler makes the 65 as tough as the roads you travel. This 65 quart cooler is arguably the best cooler for the money. Grip Feet and 2” Tie-Down Slots keep 65 right where it needs to be. And the top is big enough for everyone to put their feet on at the end of the day, and re-live moments that become part of everyone’s story. This is the cooler for a lifetime of experiences wherever you find them.

And living adventures with folks you may not know well going in but come out as lifelong compadres.

START WITH A COOL COOLER: If stored in warm places, a significant amount of ice will be wasted cooling the cooler itself. Preload your cooler a few hours prior to use with a sacrificial bag of ice to cool it down.

ICE TEMPERATURES VARY SIGNIFICANTLY: Warm ice (around 32°F) is typically wet or dripping, and won’t last long. Ice that is colder than the freezing point is relatively dry and will last substantially longer.

BLOCK ICE VS. CUBED ICE: Smaller, cubed ice will chill a cooler and the contents more quickly, but block ice melts at a much slower rate. Use a mix of both to chill contents and achieve long-term ice retention.

ICE-TO-DRINK RATIO: The optimum ice-to-drink ratio is 2:1 by volume. Example for every 12 oz can add about 3 cups of ice.

AIR IS THE ENEMY: Large areas of air inside your cooler will accelerate ice-melt as the ice is consumed cooling the air. These spaces are best filled with extra ice, towels, or crumpled newspaper if weight is a concern.

DON’T DRAIN THE WATER: Once your cooler is in use, DO NOT empty the cold water. The water helps to insulate the remaining ice. However, exposed food and meat should be kept out of the water.

SUNLIGHT IS A HEAT SOURCE: Keep your cooler out of direct sunlight when possible. Ice can last up to twice as long in the shade.

LIMIT COOLER ACCESS: Every time you open the cooler, you are exchanging the cold air inside for warm air outside that must then be cooled, causing faster ice-melt.

GRIZZLY ICE AMP & ICE DIVIDERS: Extend your regular ice with ICE AMPs or ICE DIVIDERS both have a phase change state just below that of regular ice. That phase change allows the ICE AMP or ICE DIVERS to do all the cooling work before your ice melts.

Buy on Amazon

4. Hatch Coolers Canvas Soft Lunch Cooler with High-Density Insulation, Made in USA.

Hatch Coolers Canvas Soft Lunch Cooler with High-Density Insulation, Made in USA

Highlighted Features:

  1. Soft-sided cooler with high-density insulation and removable shoulder strap
  2. Guaranteed to hold ice for 24 hours in 120-degree weather; 6-can capacity
  3. Perfect for boating, fishing, hunting, parties, sporting events, and picnics
  4. Features a leak-proof liner
  5. Twice the insulation of other soft-sided coolers; Made in the USA.

Ready for outdoor fun, travel, and everyday use, rugged Hatch Canvas soft-sided coolers combine high-density, four-layer insulation with a 600-denier polyester canvas backed by heavy-duty PVC for added strength.

Lightweight and collapsible for easy storage, Hatch Canvas coolers are ideal for everything from boating, fishing, and hunting excursions to parties, picnics, and sporting events.

eaturing twice the insulation of other soft-sided coolers, Hatch Canvas coolers are guaranteed to hold ice for up to 24 hours in 120-degree weather. Bringing an item for dinner or a potluck, or taking lunch to work? Use your Hatch cooler to keep your food warm as well.

Hatch coolers are completely manufactured in the USA from its factory in upper east Tennessee by experienced, well-trained, and dedicated employees with a collective 250 years of sewing experience.

The Hatch Canvas cooler includes two padded hand handles for easy handling and a durable YKK zippered closure. For longer treks, it also features a removable padded shoulder strap, plus two eyehooks on the top for strapping to a backpack or luggage carrier. They also offer a zippered side pocket for storing small items like a bottle opener, silverware, wallet, and other dry storage needs.

The 6-can and 9-can sizes are great for taking lunch to work or bringing along on picnics (and are also legal at most NASCAR tracks).

The 12-can and 18-can coolers are perfect for day trips, grocery shopping, cooling drinks at your kid’s game, and taking dishes to friends’ homes.

Keep things cool for family camping trips, outdoor adventures like hunting and fishing, tailgate parties, and other gatherings with the 24-can, 36-can, and 48-can Canvas coolers.

Buy on Amazon

5. KENAI 25 Cooler, Seafoam, 25 QT, Made in USA.

KENAI 25 Cooler, Seafoam, 25 QT, Made in USA

Highlighted Features:

  1. If the walls of a cooler aren’t uniform in thickness, the strength and durability of that cooler is questionable at best. Our coolers are built with rotationally-molded LLDPE plastic to ensure even wall thickness, durability, and max performance on every adventure.
  2. We want to protect The Good Land for all of us to enjoy. KENAI Coolers use Ecomate for optimal cooling. We also use it because this unique insulation has no global warming potential, no ozone depletion potential, and is made with no volatile organic compounds.
  3. A cooler isn’t cool if it doesn’t keep things cold. KENAI Cooler lids seal for optimal insulation even in hot temperatures with a silicone rubber gasket to keep cold air trapped inside to extend the life of ice. Everything for your adventures stay colder, fresher, longer.
  4. When you’ve got an armful of stuff for the cooler and no one’s around to open the lid for you – what do you do? Give a quick, one-handed flip of the latch and you’re in. So is your stuff. Secure the latch and the lid won’t open. Genius.
  5. MADE IN THE USA .

Introducing the KENAI 25. The 25 is smallest KENAI Cooler but there’s nothing small about it. 25 is big-time on performance and features. It fits easily in the back seat or back of the truck, holds plenty of ice, food, and drink, and keeps everything cold and fresh for days. You don’t need a lot of time to live an adventure. You just have to make the most of the time you have. Live it with the KENAI 25.

It’s either an adventure or it’s not. Some just happen in less time. For those 2-3 day treks across The Good Land in search of whatever lies at the end of the trail or rips a lip at the end of your line?

START WITH A COOL COOLER: If stored in warm places, a significant amount of ice will be wasted cooling the cooler itself. Preload your cooler a few hours prior to use with a sacrificial bag of ice to cool it down.

ICE TEMPERATURES VARY SIGNIFICANTLY: Warm ice (around 32°F) is typically wet or dripping, and won’t last long. Ice that is colder than the freezing point is relatively dry and will last substantially longer.

BLOCK ICE VS. CUBED ICE: Smaller, cubed ice will chill a cooler and the contents more quickly, but block ice melts at a much slower rate. Use a mix of both to chill contents and achieve long-term ice retention.

ICE-TO-DRINK RATIO: The optimum ice-to-drink ratio is 2:1 by volume. Example for every 12 oz can add about 3 cups of ice.

AIR IS THE ENEMY: Large areas of air inside your cooler will accelerate ice-melt as the ice is consumed cooling the air. These spaces are best filled with extra ice, towels, or crumpled newspaper if weight is a concern.

DON’T DRAIN THE WATER: Once your cooler is in use, DO NOT empty the cold water. The water helps to insulate the remaining ice. However, exposed food and meat should be kept out of the water.

SUNLIGHT IS A HEAT SOURCE: Keep your cooler out of direct sunlight when possible. Ice can last up to twice as long in the shade.

LIMIT COOLER ACCESS: Every time you open the cooler, you are exchanging the cold air inside for warm air outside that must then be cooled, causing faster ice-melt.

GRIZZLY ICE AMP & ICE DIVIDERS: Extend your regular ice with ICE AMPs or ICE DIVIDERS both have a phase change state just below that of regular ice. That phase change allows the ICE AMP or ICE DIVERS to do all the cooling work before your ice melts.

Buy on Amazon

6. KENAI 45 Cooler, Gray, 45 QT, Made in USA.

KENAI 45 Cooler, Gray, 45 QT, Made in USA

Highlighted Features:

  1. If the walls of a cooler aren’t uniform in thickness, the strength and durability of that cooler is questionable at best. Our coolers are built with rotationally-molded LLDPE plastic to ensure even wall thickness, durability, and max performance on every adventure.
  2. We want to protect The Good Land for all of us to enjoy. KENAI Coolers use Ecomate for optimal cooling. We also use it because this unique insulation has no global warming potential, no ozone depletion potential, and is made with no volatile organic compounds.
  3. A cooler isn’t cool if it doesn’t keep things cold. KENAI Cooler lids seal for optimal insulation even in hot temperatures with a silicone rubber gasket to keep cold air trapped inside to extend the life of ice. Everything for your adventures stay colder, fresher, longer.
  4. When you’ve got an armful of stuff for the cooler and no one’s around to open the lid for you – what do you do? Give a quick, one-handed flip of the latch and you’re in. So is your stuff. Secure the latch and the lid won’t open. Genius.
  5. MADE IN THE USA .

The KENAI 45 is the cooler to have when you’re off on shared adventures. 45-quart capacity gives you the room for ice, food, and beverages no matter where you are or what you’re doing. Everything will stay cold and fresh during extended trips. The Dual Handle System won’t lighten the load, but they sure make carrying easier.

Tie down slots prevent the 45 from sliding in the back of the truck or boat as you travel. And 45 is built to withstand a lifetime of tough use. When you’re off on your next trip, add an extra pal to your group. He’s the one who’ll work hard in the background while you’re off discovering all that’s great about The Good Land. And living adventures with folks you may not know well going in but come out as lifelong compadres.

START WITH A COOL COOLER: If stored in warm places, a significant amount of ice will be wasted cooling the cooler itself. Preload your cooler a few hours prior to use with a sacrificial bag of ice to cool it down.

ICE TEMPERATURES VARY SIGNIFICANTLY: Warm ice (around 32°F) is typically wet or dripping, and won’t last long. Ice that is colder than the freezing point is relatively dry and will last substantially longer.

BLOCK ICE VS. CUBED ICE: Smaller, cubed ice will chill a cooler and the contents more quickly, but block ice melts at a much slower rate. Use a mix of both to chill contents and achieve long-term ice retention.

ICE-TO-DRINK RATIO: The optimum ice-to-drink ratio is 2:1 by volume. Example for every 12 oz can add about 3 cups of ice.

AIR IS THE ENEMY: Large areas of air inside your cooler will accelerate ice-melt as the ice is consumed cooling the air. These spaces are best filled with extra ice, towels, or crumpled newspaper if weight is a concern.

DON’T DRAIN THE WATER: Once your cooler is in use, DO NOT empty the cold water. The water helps to insulate the remaining ice. However, exposed food and meat should be kept out of the water.

SUNLIGHT IS A HEAT SOURCE: Keep your cooler out of direct sunlight when possible. Ice can last up to twice as long in the shade.

LIMIT COOLER ACCESS: Every time you open the cooler, you are exchanging the cold air inside for warm air outside that must then be cooled, causing faster ice-melt.

GRIZZLY ICE AMP & ICE DIVIDERS: Extend your regular ice with ICE AMPs or ICE DIVIDERS both have a phase change state just below that of regular ice. That phase change allows the ICE AMP or ICE DIVERS to do all the cooling work before your ice melts.

Buy on Amazon

7. KONG Coolers, 50 Quart Cooler ,Made in The USA.

KONG Coolers | 50 Quart Cooler | Made in The USA |

Highlighted Features:

  1. Our KONG 50 Quart Cooler holds up to 32 12-oz cans along with 24 pounds of ice. The KONG 50 Quart Cooler is just right, not too big and not too small!
  2. KONG Coolers are designed to outlast your adventure and our competition with 5+ day ice retention!
  3. Your KONG will open to a 45-degree angle while backed up against a wall or other object. The ability to get into your cooler when you’ve packed your gear tight and you’re thirsty is priceless.
  4. Our dividers can be used as a shelf, cutting board, side table while keeping food dry and drinks wet. The KONG 50 Quart Cooler comes with one divider for handy, in-cooler storage or to be used as a shelf. Additional accessories are sold separately.
  5. The KONG 50 Quart Cooler measures 30.5″ long x 17.375″ wide x 16.875″ high and weighs 33 lbs when empty.

The KONG 50 is one of the most versatile and most popular coolers in the KONG lineup. Not too big and not too small. Use the KONG 50 to host your buddies or hit the back country with a friend.

Buy on Amazon

8. Hatch Coolers Canvas Soft Lunch Cooler.

Hatch Coolers Canvas Soft Lunch Cooler

Highlighted Features:

  1. Soft-sided cooler with high-density insulation and removable shoulder strap.
  2. Guaranteed to hold ice for 24 hours in 120-degree weather; 9-can capacity.
  3. Perfect for boating, fishing, hunting, parties, sporting events, and picnics.
  4. Features a leak-proof liner.
  5. Twice the insulation of other soft-sided coolers; Made in the USA.
 
 
 

Ready for outdoor fun, travel, and everyday use, rugged Hatch Canvas soft-sided coolers combine high-density, four-layer insulation with a 600-denier polyester canvas backed by heavy-duty PVC for added strength.

Lightweight and collapsible for easy storage, Hatch Canvas coolers are ideal for everything from boating, fishing, and hunting excursions to parties, picnics, and sporting events.

Featuring twice the insulation of other soft-sided coolers, Hatch Canvas coolers are guaranteed to hold ice for up to 24 hours in 120-degree weather. Bringing an item for dinner or a potluck, or taking lunch to work? Use your Hatch cooler to keep your food warm as well.

Hatch coolers are completely manufactured in the USA from its factory in upper east Tennessee by experienced, well-trained, and dedicated employees with a collective 250 years of sewing experience.

Buy on Amazon

9. Bison SoftPak Coolers.

Bison SoftPak Coolers

Highlighted Features:

  1. Keeps ice for up to 24 hours in 120-degree heat. With nearly an inch of insulation, this beverage cooler keeps your drinks frosty cold. Twice as insulated as most coolers.
  2. Wrapped in a heavy duty 1000 denier vinyl shell, it’s stronger than other soft-sided coolers, tear resistant up to 375 pounds, and UV protected to ensure it doesn’t fade.
  3. All Bison Soft Coolers products come with an industry leading 2-year warranty and 30-day trial. If you don’t love Bison Coolers, send it back and you’ll receive a full refund.
  4. Holds 24 cans and about 10 pounds of ice. Dimensions: 18″ x 10″ x 11″. PLUS: free bottle opener included. Great for Day Trips, Sporting Events, & Manly Picnics.
  5. We take pride in the fact that our SoftPak line is produced in the USA and we are doing our small part to create jobs domestically instead of outsourcing them overseas.

This isn’t your mom’s old personal soft-sided cooler. This Made in USA cooler packs a serious punch. The Bison SoftPak is tough as nails and keeps ice for up to 24 hours in 120-degree heat. Wrapped in a heavy-duty 1000 denier vinyl shell, it’s stronger than any other soft-sided cooler, tear resistant up to 375 pounds and UV protected to ensure it doesn’t fade. With nearly an inch of insulation, this beverage cooler keeps your drinks frosty cold.

12 can Softpak Dimensions: 13″ x 8″ x 11″

Capacity: Holds 12 cans and about 5 pounds of ice

24 can Softpak Dimensions Dimensions: 18″ x 10″ x 11

Capacity: Holds 24 cans and about 10 pounds of ice.

You can be sure our Softpak will do a great job keeping your drinks ice cold but when it comes time to pop the top we’ve got you covered with our included bottle opener. We take pride in the fact that our Softpak line is produced in the USA and we’re doing our small part to create jobs domestically instead of outsourcing them overseas. The Bison SoftPak is tough as nails and keeps ice for up to 24 hours in 120 degree heat. Wrapped in a heavy duty 1000 denier vinyl shell, it’s stronger than any other soft-sided cooler.

Buy on Amazon

10. Arctic Zone Titan Deep Freeze Zipperless Hardbody Cooler.

Arctic Zone Titan Deep Freeze Zipperless Hardbody Cooler

Highlighted Features:

  1. Deep Freeze high performance insulation with radiant heat barrier reflects heat rather than absoring it; Includes insulated front pocket
  2. Patented, “flip open” Zipperless lid allows for quick accress to food and drinks; Features FDA compliant HardBody liner with removable SmartShelf
  3. Features an Ultra Safe leak proof, easy clean interior lining; Adjustable Backsaver shoulder strap with shoulder pad for convenience and usability
  4. Rhino-Tech water and stain resistant, wipe clean exterior is abrasion and puncture resistant and will not crack over time
  5. Exterior Dimensions: (L x W x H) 12.25″ x 8″ x 12.25″; Interior Dimensions: (L x W x H) 9.8″ x 4.75″ x 10.25″

The Titan 16 Can Zipperless Cooler keeps ice up to 2 days! Deep Freeze high performance insulation with radiant heat barrier and triple layer ColdBlock base combine to create superior cooling.

The cooler features a “flip-open”, patented Zipperless lid that provides quick access to food and drinks as well as an insulated front pocket. The Rhino-Tech exterior is tough, water resistant and wipes clean easily.

The interior includes a durable HardBody liner with SmartShelf. The SmartShelf allows you to keep hard stuff like drinks separate from soft stuff, so sandwiches and other soft foods don’t get crushed. If you want to use the entire liner, the SmartShelf easily removes to provide one large compartment.

Designed for convenience and usability, this cooler also features an adjustable Backsaver shoulder strap with anti-slip shoulder pad that centers load weight to reduce muscle stress.

The 100% “Keeps Ice” test is an industry standard test that’s used as a way to compare the performances of different coolers. The scenarios shown are provided to help you plan your cooler contents based on the amount of time you need.

The Titan Deep Freeze Can Zipperless Cooler keeps ice up to 3 days! The exterior includes our patented, “flip-open” Zipperless lid for quick access to food and drinks as well as an insulated front pocket.

The interior features Deep Freeze high performance insulation with radiant heat barrier and a removable HardBody liner with SmartShelf. The SmartShelf allows you to keep hard stuff like drinks separate from soft stuff, so sandwiches and other soft foods don’t get crushed.

If you want to use the entire liner, the SmartShelf easily removes to provide one large compartment. Designed for convenience and usability, this cooler also features an adjustable Backsaver shoulder strap with shoulder pad and Rhino-Tech exterior material that is tough, water and stain resistant and easy to wipe clean. Interior liner dimensions: (L x W x H) 12.7 x 7.6 x 10.2 inches

Buy on Amazon